The P/EL type PROTEGO® valve is a highly developed pressure relief valve. It is primarily used as a device for relieving pressure in tanks, containers and process engineering equipment. The valve protect against unallowable overpressure and prevents the unacceptable loss of product vapors close to the set pressure.
The device will start to open as soon as the set pressure is reached and only requires 10% overpressure to full lift. Continuous investments into research and development have allowed PROTEGO® to develop a low pressure valve which has the same opening characteristic as a high pressure safety relief valve. This “full lift type” technology allows the valve to be set just 10% below the maximum allowable working pressure of the tank and still safely vent the required mass flow.
Due to our highly developed manufacturing technology the tank pressure is maintained up to set pressure, with a tightness that is far superior to the conventional standard. This feature is achieved by valve seats made of high quality stainless steel and with precisely lapped valve pallets (1) or with an air cushion seal (2) in conjunction with high quality FEP diaphragm. The valve pallets are also available with a PTFE seal to prevent the valve pallets from sticking when sticky products are used, and they enable the use of corrosive media. After the excess pressure is discharged, the valve reseats and provides a tight seal.
The optimized fluid dynamic design of the valve body and valve pallet is a result of many years of research work, which allow a stable operation of the valve pallet and optimized performance resulting in reduction of product losses.
Material selection for housing | Design B C Housing Steel Stainless Steel Heating jacket (P / EL-H-...) Steel Stainless Steel Valve seat Stainless Steel Stainless Steel Weather hood Steel Stainless Steel Protective mesh screen Stainless Steel Stainless Ste |
Material selection for pressure valve pallet | Design A B C D Pressure range [mbar] [inch W.C.] +3,5 up to +5,0 +1.4 up to +2.0 >+5,0 up to +14 >+1.4 up to 5.6 >+14 up to +210 >+5.6 up to +84 >+14 up to +210 >+5.6 up to +84 Valve pallet Aluminium Stainless Steel Stainless Steel Stainless Steel Sealing FEP FEP Metal to Metal PTFE Special materials(Aluminium-coated, Titanium, Hastelloy) and higher pressure Settings upon request |
DN | 0 / 2" 50 / 2" 80 / 3" 80 / 3" |
Set pressure | ≤ +80 mbar > +80 mbar ≤ +80 mbar > +80 mbar |
Set pressure | ≤ +32.1 inch W.C. > +32.1 inch W.C. ≤ +32.1 inch W.C. > +32.1 inch W.C. |
a | 218 / 8.58 218 / 8.58 218 / 8.58 218 / 8.58 |
b | 287 / 11.30 452 / 17.80 289 / 11.38 454 / 17.87 |